Summit Appliance SWC1535B Use and Care Manual download pdf (Page 9)

5. Screw the alternative left top hinge

○

, included in the fittings, on the left hand side of cabinet. (Fig. 3)

6. Set the upper glass door to the designated position. Then turn around the middle hinge 180° and refit

it on the opposite side by screwing in the three bolts. Level the door by adjusting the three fixing bolts.

And make sure that the spacers which the hinge pins sit on are correctly positioned. (Fig. 3)

7. Set the lower glass door to the designated position and install the two lock screws 1 to connect the

door shaft assembly 2 with the glass door and tighten them before the door is leveled. (Fig. 1)

8. Remove the handles from the left side of the doors and install them on the right side. (See next

section.)

INSTALLING THE STAINLESS STEEL HANDLE

This appliance includes a stainless steel handle that is not required to

operate the unit. To install the handle, follow the instructions below:

Locate the handle 1 over the pins 3 of the door and tighten the handle

by screwing in screws 2 with an Allen wrench.

OPERATING YOUR APPLIANCE

It is recommended you install the appliance in a place where the ambient temperature is between 72º and

78ºF (23º-26ºC). If the ambient temperature is above or below the recommended temperatures, the

performance of the unit may be affected. For example, placing your unit in extreme cold or hot conditions

may cause interior temperatures to fluctuate. The range of 41º-72ºF (5º-22ºC) may not be reached.

RECOMMENDED TEMPERATURE SETTINGS

Conservation

49 ~ 57ºF

10 ~ 14ºC

Red Wines

58 ~ 72ºF

15 ~ 22ºC

Dry/White Wines

48 ~ 57ºF

9 ~ 14ºC

Rosé Wines

49 ~ 51ºF

10 ~ 11ºC

Sparkling Wines

41 ~ 47ºF

5 ~ 8ºC

CONTROL PANEL for SWC1535B

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

No comments

Summit Appliance SWC1535B Use and Care Manual Page 9